Dynacord L1300FD DSP

Features:

• Live performance DSP amplifier
• Fully integrated professional speaker processing with FIR Drive technology
• Market leading acoustic performance and rock solid reliability
• True 2 ohm stability
• Intuitive system control software, makes setup and control easy

Technical Specificatons:

• Maximum Output Power, Bridged: 4Ω=2000W; 8Ω=1200W
• Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3 V
• Voltage Gain ref.1kHz: 32.0dB
• IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
• DIM 30: < 0.05% (3.15 kHz, 15 kHz)
• Maximum Input Level: +21 dBu
• Crosstalk: < -80dB (ref. 1 kHz, at 100 W/4 Ω)
• Frequency Response: 10 Hz to 21 kHz (±1 dB)
• Input Impedance, active balanced: 20kΩ
• Signal-to-Noise Ratio (A-weighted): >104dB
• Output Noise , A-weighted: < -68 dBu
• Output Stage Topology: Class AB
• Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
• Power Consumption: 550 W (⅛ Maximum Output Power @4Ω)
• Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
• Cooling: Front-to-rear, 3-stage-fans
• Safety Class: I
• Available Color: Black
• Height: 88mm (3.46")
• Width: 483mm (19.02")
• Depth: 462.4mm (18.2")
• Weight Net: 12.9kg (28.44 lbs)
• Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance
• Mains Fuse: 240 V/230 V: T10AH; 120 V/100 V: T20AH
• Operating Temperature Range: +5°C to +40°C (40°F to +105°F)
• Total Harmonic Distortion: < 0.05% (at 450 W/4 Ω MBW = 80 kHz, 1 kHz)

Specs:

• Color: Black
• Set Offer: no
• Channels: 2
• Fanless: no
• Bridge operation: yes
• Output power into 4 ohms: 2000 W
• Output power into 8 ohms: 1200 W
• digital power amplifier: yes
• Type: Amps
• Theme: PA and Sonication

Instruction manual / Safety instructions:

• Manual (6.91 MB)

Further links:

• Print View